SEND SMS
SEND EMAIL
 

Profile

Applications Of Hydraulic Cylinders & Power Pack Units

Applications Of Hydraulic Cylinders & Power Pack Units

Machine Tool

  • Special Purpose Machines
  • CNC Machines
  • Hydraulic Press Machines
  • Hydraulic Broaching Machines
  • Hydraulic VMC and VTL Machines
  • Hydraulic Cutting Machines
  • Hydraulic Pick and Place Automation
  • In all types of Hydraulic Automation

Material Handling Equipment

  • Hydraulic Conveyor Systems
  • Hydraulic Scissor Lifts
  • Hydraulic Lifts
  • Hydraulic Stackers
  • Small Hydraulic Cranes

Earth Moving Equipment

  • Hydraulic Mobile Control Vehicles

Foundry Machines

  • Furnaces
  • Pressure Die Casting Machines

Hydraulic Fixtures

Hydraulic Test Rigs


Hydraulic Operated Construction Machines


Injection Moulding Machines and many more.

Material of Construction for Hydraulic Cylinders & Power Pack Units

Cylinder Barrel:

  • Made of cold drown seamless pipe honed to mirror finish (ST 52, 106)

Tie Rods:

  • Made of special alloy steel and are prepossessed at assembly to minimize possible elongation.

Piston Rod:

  • Made of medium carbon steel, ground and hard chrome plated. Plating layer 35 micron.

Gland Seals:

  • Made of polyurethane RUS 'U' cup seal which has primary and secondary lip for maximum flexibility also in viton.

Piston:

  • Made of fine carbon steel

Rod Seals:

  • 'U' cup or step seals as per the, operation requirement.

Cover Plates:

  • Made of mild steel end constructed with sturdy design to withstand high pressure load.

Wiper Seals:

  • Made of polyurethane rubber to prevent any dust particles from entering inside.

Caps:

  • Made of mild steel, precision machined to assure perfect alignment of piston rod and cylinder bore.

Other Specification of Hydraulic Cylinders & Power Pack Units

Pressure Rating:

  • Standard hydraulic cylinders are rated at 160 bar. Cylinders for higher pressure ratings up 600 bar can  be manufactured.

Bore:

  • Ø 25 mm to Ø 300 mm in standard range

Temperature:

  • The seal of standard cylinders can withstand up to 70°C. Cylinders with special seals can be manufactured for higher operating temperatures up to 350°C

Stroke:

  • Up to 6000 mm can be designed and manufactured

Mountings:

  • 12 types of mountings

Format While Placing an Order

Format While Placing an Order
   
Refer to pictorial format while placing an order:

Example: For Hydraulic Cylinder with bore 100 mm, Piston Rod Dia 56 mm, stroke 500 mm, Mounting Front Flange and Cushioned at Both Ends will be specified as AHP - 100 / 56 / 500 / ME5 HR /160 / CB
zoomup


Reach Us
Rajendra Sonawane
Chikhali
Pune- 412114, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS